Acculine-Title-Process2

IMG_0059-001

A rail survey is made, giving you a survey map of the exact condition of the rails, separately and in relation to each other.

Rail-Accuracy-Doc

A drive motor and grinder brackets are attached to the carriage.

IMG_0062
IMG_0053

The V-RAIL is shimmed, if possible, aligned, and all three surfaces are ground to a laser line removing all vertical and horizontal deviations. Grouted rails cannot be adjusted, so any deviation must be corrected by grinding.

IMG_0054

The FLAT RAIL is shimmed, if possible, then the grinder is moved to the flat rail side, and the flat rail is ground level with the V-rail.

Work is scheduled so there is no downtime for your mill.